Night Vision. Motion Sensor. Camcorder. Micro SD Slot.
- Main Feature: – mini 1080P full HD car DVR camera recorder – High definition full HD1080P
- Support 32GB TF card max. (Memory card not included)
- Image proportion: 4 : 3
- Battery capacity: 200mAh- Working time: About 100 minutes at 1080P 30fps –
- Charging time: About 2 – 3 hours- Charging voltage: DC 5V
- Interface type: Mini 8 pin USB – Cable length: 80cm – Built-in lithium battery sustainable camera up to 100 minutes
- Type: Full HD Dashcam System requirements: Mac OS x 10.3.6 above,Win 7,Windows 2000 / XP / Vista Max External Card Supported: TF 32G (not included)
- Class Rating Requirements: Class 10 or Above Battery
- Type: Built-in Charge way: USB charge by PC Working Time: About 100 minutes at 1080P 30fps Camera Pixel : 12MP
- Decode Format: MJPG Video format: AVI Video Resolution: 1080P (1920 x 1080),720P (1280 x 720) Video Frame Rate : 30fps Image Format : JPG Image resolution: 12M (4032 x 3024) Audio System : Built-in microphone/speacker (AAC) USB Function: USB-Disk Interface Type: Mini USB
- Night Vision Mode: Yes
- Package Contents: 1 x Mini Car DVR Camera, 1 x USB / TV Out 2-in-1 Cable, 1 x Bracket, 1 x Clip, 1 x User Manual in Chinese and English 1 x retail box
- 1 x Mini Car DVR Camera
- 1 x USB / TV Out 2-in-1 Cable, 1 x Bracket
- 1 x Clip
- 1 x User Manual in Chinese and English 1 x retail box
The goods were ordered 2020-01-15, received at the Post Office 2020-02-25. Shipping time 1 month 10 days
Before using the camera, be sure to format the micro SD card to FAT32 format (NTFS camera does not understand).
Video shoots in good light normally, but in a darkened place the noise is visible immediately.. Considering the very low price such a price is quite a successful camera. recommend to Purchase.
It is a good economic option as a spy camera or surveillance camera limited by battery life, because of its size not having screen is uncomfortable to manipulate and configure.
Compatible with Windows 10
Camera takes normally. Connected to the computer with Windows 10, computer without problems identified it. Like all OK!
great quality for the price ,might buy another, and night mlde works great, just wish the battery was bigger
Instructions – Only a few buttons are available. User interface is not great. This is to be expected from a device that is so small.
- On the case sq11-two buttons “power” and “mode”. Turn on and off the camera-hold the “power” button. After turning on, the camera is in standby recording mode 720 p.
- To start recording, press the power button once, the LED blinks 3 times, and the recording will start.
- Stop-click again on the “power” button, and you will return to standby mode, while the indicator should light blue.
- To go to 1080p mode, you need to press the “mode” in the standby mode (blue lights), the indicator will start to light red and blue. To start recording 1080 p-the same actions as with 720 p.
- Photo Mode-from the standby mode 1080p (it burns blue and red) press the “mode” button again, the indicator will turn red (constantly). To take a picture, click on “power”, blinking the diode, means that the picture is taken.
- Night shooting mode is activated from standby mode. Press the “power” button for 3-4 seconds, this mode is switched off the same way. 1080p survey examples (1 minute-approximately 135 MB)